If you can not see the newsletter click here for HTML

Esprit Model
Esprit Model
Suggestion

News Flash   
Exclusive Discounts and Promotions
FacebookBlog Esprit ModelYoutubeBlip.TV
Don't be Left Out Follow us Now!
 

Firmware Update 2.20 for DC-16, DS-16 Transmitters

After a long time of development and testing we are able to release the new version of DC/DS-16 firmware to the public. This update comes up with new modifications as well as brand new features:

- Add servo balancer for use with multi-servo wing surfaces
- Add view of the telemetry value from any sensor instead of the digital clock
- Check the signal strength immediately after the model is turned on and connected to the transmitter
- Store service information of the transmitter, alarms, and position of up to 4 controls on the SD card
- Password protection against unwanted modifications to a model configuration

This version modifies the evaluation algorithm of the antenna signal strength (RSSI), while still keeping the original numerical range from 0 to 9. The displayed values, however, decrease with distance more linearly.

Swash Ring, enhanced Gyro Settings and Heli model wizard for the initial configuration of the helicopter.

The Device Explorer is able to generate on-demand commands to EX Bus compatible devices.

New, added function for the internal connector. The transmitter can handle up to 8 channels of the PPM input signal. The signal should be presented on the pin No. 1. To prevent any damage, you need to use the 3V logic level and protective elements on the input. Within the application you can assign any of the PPM channels to any function of the transmitter - use a standard control input selection dialogue. The PPM input is not linked with the trainer system in any way and works separately. Possible use in cooperation with head-tracking systems in multi-rotor application.

Please read the attached Release Notes prior to performing any update. This document always includes the actual information given to the current version of firmware.
Download Release Notes for 2.20 Update EN
Download Release Notes for 2.20 Update FR
Download Release Notes for 2.20 Update DE

DS-16


Servo Balancer for Multi Servo Wing Surfaces!!!

The function of the servo balancer is designed for large models that have control surfaces driven by mechanically linked servos. Since each servo can be preset from the factory in a different way and mounting servos into the model is not always accurate, it is now possible to set servo travel algorithmically to ensure minimum mechanical stress during the movement of the controls.

Servo Balancer for Multi Servo Wing Surface Servo Balancer for Multi Servo Wing Surface


Advanced Options for Gyro Settings!!!

Now it is possible to make up to three independent functions for controlling gyro gain. By default, gyro No. 1 is always active. The others are activated in the Model --> Basic Properties menu together with the Governor function.

In the Gyro settings menu it is possible to edit up to three main values for each gyro function in all flight modes separately according to the position of the main control/switch.

Advanced Options for Gyro Settings!!! Advanced Options for Gyro Settings!!!


PPM Input Port for External Devices!!!

The DC-16 now comes fully equipped to deal with the demand of FPV head trackers with its PPM input port. The port can support up to 8 channels of throughput and is compatible with all Fat Shark and Carl Zeiss FPV Goggles. As always with the Jeti line of transmitters you can assign any of the PPM channels to any function of the transmitter, making the DS-16 and DC-16 one of the best transmitters available for FPV. (The head tracking module for Fatshark and Carl Zeiss must be purchased separately in order to utilize these features.)

The transmitter can handle up to 8 channels of the PPM input signal. The signal should be present on the pin No. 1 (the DC/DS-16 user manual calls this pin as reserved). To prevent any damage, you need to use the 3V logic level and protective elements on the input. Within the application you can assign any of the PPM channels to any function of the transmitter - use a standard control input selection dialogue. The PPM input is not linked with the trainer system in any way and works separately. Possible use in cooperation with head-tracking systems etc.

Advanced Options for Gyro Settings!!!


Jeti USA Press Release (Jeti USA 2/50 Warranty)!!!
2 Years & 50% Replacement Warranty for All Jeti 2.4GHz Receivers!!!

All Jeti devices (Radios, Receivers, ESCs, Sensors, Etc.), have a 24 month warranty (from date of purchase) against manufacturer and material defects. On the top 2 year warranty we offer for all Jeti 2.4GHz Receivers (R4, R5, R6, R7, R9, R11, R14 & R18) also additional coverage under a 50% replacement warranty. This means that if your device is damaged by something other than manufacturer or material defect (Crash, Handling ), the original owner can purchase a replacement for 50% of that device's current retail price. This warranty covers the original owner for as long as they own the device. For this warranty, we must first receive the damaged device.

Esprit Model is the US warranty and service center for all of the Jeti products that we sell. This means that if you have an issue with any Jeti item purchased through Esprit Model you should contact us directly to resolve the issue. Jeti Transmitters, JetiBox Profi and Phasor Race motors have a 24 month warranty (from date of purchase) against manufacturer and material defects. For details, refer to the item's user manual.

JetiJetiJeti



DS-16 Carbon





Esprit Model 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Model 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here