Hot New Additions!!!
Jeti Wireless Power RC Switch 5A & 10A, IN STOCK!!!
Jeti Telemetry Sensors, Monitors & Programmers, IN STOCK!!!
(Full Story)
Telemetry Data of the Jeti DC/DS-16 Software!!!
We have capabilities to display all logged telemetry data directly on the transmitter LCD screen.
(Full Story)
Jeti Full Metal Transmitter Gimbals with 9 Ball Bearings & Hall Sensors !!!
(Full Story)
New Jeti DC/DS Transmitter Accessories, IN STOCK!!!
(Full Story)
New Jeti Competition Phasor Race 2014, 2026, 2035 Geared Motors, IN STOCK!!!
The Phasor Race design represents the best combination of high performance and durability. The whole line of Jeti Phasor motors targets mainly professionals and competition FAI F5B, F5F, F5J pilots looking for uncompromised precision and quality. The Jeti motors are made using 20mm, 4-pole rotors wrapped in Kevlar and designed to withstand up to 70,000 RPM.
(Full Story)
Jeti Dual Redundant Switch DSM 10, IN STOCK!!!
The DSM 10 from Jeti is dual input redundant electronic switch designed to operate with included magnetic key. The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycles, unlike mechanically operated switches. The redundant DSM 10 switch automatically monitors and switches between two power supplies (Rx Batteries) keeping your system operational.
(Full Story)
Jeti AFC Anti-Spark Connectors 4, 5.5, 8mm Good up to 300A!!!
|
|
|
Our Gift from Your Friends at Esprit Model!!!
Get 11% OFF any In Stock Items!!!*
Next 48 hours ONLY
Coupon Code: SUMMER11OFF
(Expires: September 14, 2014 at 24:00 EST US)
* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.
Jeti Duplex 2.4GHz DS-16 Radio System!!!
True 21st Century Precision & Quality!!!
The Jeti Duplex 2.4GHz DC-16 "Limited Edition" Carbon Line Computer Radio System!!!
Jeti Duplex 2.4GHz DS-14 Radio System!!!
True 21st Century Precision & Quality!!!
This feature takes the abilities of the Duplex telemetry system to the next level. Not only can you display telemetry data, record it to your SD card or have it voice announced, now it is possible to control specific model functions using sensors inputs. This way, some tasks that previously required manual adjustment via visual estimation or alarms can now be automated.
Telemetry Controls
This feature increases the opportunities of the Duplex telemetry system one class higher. Not only can you display telemetry data, record it to your SD card or have it voice announced, now it is possible to control specific model functions using sensors. This way some tasks that previously required manual adjustment via visual estimation or alarms can now be automated.
Announcement of Proportional Controls Positions
In this menu, you can set a sound notification or up to four independent controls. You can choose basic beeping the middle control position (Center-Beep mode), but voice announcements of the current position is also available (Voice mode).
Digital Trim Function Control
Digital trims can be used independently as controls of any functions. In the menu Fine Tuning » Digital Trim, there it is possible to assign special functions "Trim.Ctrl" or "Trim.RstOn" (Trim » Auto reset enabled) to any digital trim.
Examples for the possible use of the telemetry controls
- If the model speed is less than X m/s, flaps will be raised automatically.
- If the current is larger than X amperes, the motor run timer starts.
- If the motor temperature is higher than 80 °C, the maximum throttle will be limited by the mix.
- If the on-state of the limit switch is detected, the sequencer automatically starts. (eg after opening the landing gear doors, the main gear will be deployed).
 
Introducing Brand New Jeti Telemetry Sensor MVario2 EX Variometer, F5J-ALES Limiter & Expander, IN STOCK!!!
MVario2 is a system that measures atmospheric pressure and using the obtained data it calculates the altitude above sea level, airspeed, and the rate of climb as well as the rate of descent. Changes in climb and descent rates are signaled as well. The sensor also alerts you if any alarm setting is exceeded.
The sensor enables an acoustic signal for the climb rate/descent rate or for exceeding of a pre-adjusted limit value. The acoustic signal consists of 4 different kinds (steps) for climbing and the same amount of steps for descending. The step width can be adjusted by the user. The climb signal consists of short interrupted tones, the descent signal consists of long permanent tones.
F5J/ALES Altitude & Time Limiter, Motor Cut-Off Switch
If you participate in competitions in categories such as F5J or ALES (Altitude Limited Electric Soaring), set the appropriate device mode (F5J/ALES) in the MVario2 menu. Next, connect the receiver and the speed controller (ESC) as shown. The standard firmware allows you to set the cut-off height and the maximum time of motor operation
Expander Setting
Due to its flexibility, the MVario2 EX allows connection of up to two additional sensors. MVario2 then acts as an Expander and sends its own telemetry to the receiver together with the telemetry of connected sensors. You can connect for example speedometer MSPEED EX for the speed compensation (TEK) or any other sensor to any port (Ext1 or Ext2).
Jeti Duplex 2.4GHz Dual Path, True Redundant RF Link!!!
Unlike satellite receivers, Dual Path provides a true redundant RF link. Utilizing the Duplex transmitter's twin independent RF modules in Dual Path mode you bind each RF module to a separate receiver. These receivers can then be used in several ways. For example:
- Both receivers feeding a Jeti Central Box or other servo distribution systems such as the Powerbox.
- Using one receiver for each half of the model
Jeti Central Box 200 Power & Signal Distribution System!!!
The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to two batteries and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy.
With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.
Included:
(1) Jeti Central Box 200
(1) Magnetic Switch
(1) Magnetic Key
|
|
Fail-Safe Setting
Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
|
 
Jeti Mezon Lite 90 & 120 ESCs with Telemetry!!!
(Full Story)
The brand new line of Jeti MEZON ESCs target mainly professionals and pilots looking for uncompromised precision and quality. The MEZON ESCs combine new revolutionary design with Jeti's state of the art manufacturing capabilities.
Jeti MEZON ESC's advanced design and software are capable of unmatched precision and efficient motor management. With DUPLEX integration all data is measured in real time. Mezon ESCs were designed with a revolutionary BEC circuit capable measuring the exact battery capacity used and lets you set up a motor cut off point based not only on cell voltage but also on overall battery pack capacity. This function, combined with Jeti DUPLEX system, offers you full telemetry capabilities with the possibility of saving your data for further analysis.
Join the Team of Jeti USA & Esprit Model!!!
Baseball Hats, Polo Shirts and T-Shirts, IN STOCK!!!
 
 
  
|
|
