|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
  
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Gift from Your Friends at Esprit Model!!!
Get 11% OFF In Stock Items!!!*
Next 48 hours ONLY
Coupon Code: DEAL11OFF
(Expires February 1, 2015 at 24:00 EST US)
* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.
|
|
|
|
|
|
|
|
|
|
Jeti Receiver Li-Ion 2600/2600/5200/5800mAh 7.2V Battery Packs
  
Jeti Power RB Receiver 7.2V Li-Ion Battery Packs come with two receiver leads, first one with Universal Connector and second 16 gauge High Power wire with Multiplex Connector. Jeti receiver battery pack comes with battery tray holder equipped with anti-vibration isolators.
Jeti Power Ion RB receiver battery pack comes equipped with built-in over-charging (Voltage higher than 5V/cell), and over-discharging (150A) protection circuits. One of the biggest advantages of the Li-Ion cells is the mechanical resistance due to reinforced metal casing.
|
|
|
|
|
|
|
|
|
|
Emcotec DPSI 2001 RV Power Distribution System 10/26 Channel
  
The Emcotec line of DPSI 2001 RV power distribution systems provides regulated, dual redundant power supply with overload protection for each servo output. Some of the additional advantages of DPSI RV systems: high frequency interference blocking that rejects possible interference induced by long servo extensions, intelligent voltage monitoring with integrated battery status and built-in back flow "Dynamo Effect" current protection for brushless and high power servos. The DPSI RV systems are highly recommended for large (80cc-200cc) model airplanes and scale sailplanes.
Radio interference suppression of the DPSI RV is considerable more effective than interference suppression by standard ferrite rings. Naturally, error free operation of digital servos is possible with any of the 2.4GHz receivers.
Features:
- Control Servo Management for 10 Input to 26 Output Channels
- Fully Redundant Power Management with Two Independent Battery Inputs
- Intelligent Voltage Monitoring with Integrated Battery Status and Alarm Display
- High Frequency Interference Blocking which Rejects Interference from Long Servo Extensions
- Built-in Back Flow "Dynamo Effect" Current Protection for Brushless and High Power Servos
- Magnetic Fuel Cap Switch Actuator with Magnetic Key Included
- Ready for Optional Magnetic Switch Actuator or Magnetic Switch Actuator PCB
- Input Voltage: 5-10V (Recommended 6-8.4V)
- Output Voltage: 6, 6.6, 7.2V Adjustable, Single Unregulated Output
- Output Current: 8A Continuous (15 minutes), 60A Peak (10 seconds)
- Dimensions/Weight: 120mm x 75mm x 18.5mm/170g
|
|
|
|
|
|
|
|
|
|
Emcotec DPSI RV Mini 5/6 and Mini Magic 5/6 Power Distribution Systems
  
Dual built-in, voltage selectable (5.2, 5.9V) regulators supply power directly to servos and receiver independently of each other. This configuration allows you to supply different voltages to the receiver and directly connected servos (throttle) and different to the servo outputs (5.9V) or direct unregulated 7.4V from your 2S Li-poly battery packs.
|
|
|
|
|
|
|
|
|
|
Emcotec Overload Protection OCP JR Servo & Multiplex
|
Now for the first time, blocked or defective servos will not lead to short circuits, discharging of batteries or damaged cables or connectors (e.g. cable fire). The DPSI OCP "Over Current Protector" interrupts the current flow if a certain threshold is exceeded (over 8A for 16ms), and therefore protects the whole system. During programming, the system is self-learning, the highest current of the connected device is automatically remembered. This unit also protects your receivers and flight controllers from the Dynamo Effect (feedback voltage spike) that can occur when using some high power, digital servos.
|
Magnetic Switch DPSI 12V/20A CUBE Fuel Proof & Waterproof
|
The DPSI Cube is a fully waterproof and fuel proof compact and lightweight magnetic switch suitable for 20A continuous current (40A peak). Due to its high current rating, its low weight and its compact dimensions, the DPSI CUBE is suitable for narrow fuselages as well as RC cars or RC boats.
The switch can be turned ON/OFF from the outside of your model using a included magnet. Magnetic field used to turn ON/OFF magnetic switch easily penetrates covering, fiberglass or carbon fiber, so no installation holes are needed.
|
Magnetic Switch DPSI 10V/7A Nano
|
The DPSI Nano is super lightweight magnetic switch suitable for 7A continuous current (20A peak). Due to its high current rating, low weight and its compact dimensions, the DPSI Nano is suitable for narrow sailplane fuselages as well as RC cars or RC boats. The faceplate contains an integrated LED to indicate the ON/OFF status of the switch.
Magnetic field used to turn ON/OFF magnetic switch easily penetrates covering, fiberglass or carbon fiber, so no installation holes are needed.
|
|
|
|
|
|
|
|
|
|
|
Emcotec DPSI Ampere Dual Redundant Switch & Voltage Regulator
   
|
|
|
|
|
|
|
|
|
|
Emcotec Power Wire Harnesses & Connector Sets
   
   
|
|
|
|
|
|
|
|
|
|
Emcotec Single & Dual Redundant Voltage Regulators DPSI SB/DB w/Magnetic Switch
 
|
|
|
|
|
|
|
|
|
|
Emcotec Safety Power Switches SPS 34V & 70V from 60A to 280A
 
The Emcotec Safety Power Switch is an electronic primary switch designed for switching of the main power supply (Main Battery) for your RC model. It adds an element of safety when handling the model, without the need to physically disconnection of the main battery pack. The advantage of an electronic switch is that it offers a virtual unlimited On/Off cycles, unlike mechanically operated switches. The Main Switch prevents the connectors from sparking when connecting the batteries, in fact it also replaces Anti-Spark connectors.
Emcotec SPS main switch was designed to operate with included magnetic fuel cap or specially designed remote switch actuators. For additional safety combination of both switch actuators can be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
