If you can not see the newsletter click here for HTML

How To Properly Measure For A Folding Spinner

Esprit Model
FacebookBlog Esprit ModelYoutubeInstagram
KST ServosKST ServosKST ServosKST Servos

Space

Get Up to 22 Channels Using Jeti Central Box 210/220 & Central Box 100!!! (Sorry Spektrum/Futaba Cannot Do That)!!!

After receiving numerous questions regarding getting extra channels while using Jeti Central Box 210/220 we have come up with elegant configuration that uses power from CB210/220 servo port 9/10 for Central Box 100. This way you can have up to 20 high power servos connected to the system and still have full battery telemetry & redundancy.

If you connect Telemetry to the CB100 and use CB100 only for noncritical functions (Gyro, Lights, Airbrakes…) you can get away with a single power lead and go up to 22 servos.

Elite Switch

Space

Introducing Intelligently Designed, Super Heavy Duty, Brushless Motor or Gas Engine Standoffs w/Adjustable Trust Angle & Vibration Dampeners!!!

Motor/Engine Standoffs Super
Made by Hacker, our new adjustable standoffs are machined from aluminum and are designed to mount an electric motor or engine into your model. The distance from the cowl to the back of the spinner as well as side and down thrust can be adjusted continuously by turning the thread and cutting off the excess portion of the standoff. The distance from the motor mount to the motor box or firewall can be adjusted between 20mm and 55mm (3/4" and 2 1/8").

Recommended for 2kW to 9.5kW electric motors or 30cc to 180cc engines. Installation holes (ID 5.3mm) are designed for M5, 80mm to 120mm long bolts or M5 threated rods.

A washer with a spherical surface is inserted on the spherical face of the spacer bolt. When adjusting side thrust and down thrust, the wedge-shaped openings on the contact surface allow compensation of up to 4 degrees on all sides.

Motor/Engine Standoffs Super

Space

Fully Restocked & New Sizes Added to the Line of Graupner/Super CAM Folding Propellers!!

Graupner/Super CAM Folding Propellers

Space

Stop Killing Your Model, Eliminate Connector Harming Flash!!!

The Jeti Model AFC connectors eliminate the flashes often witnessed when connecting controllers (ESCs) and battery packs. Available in 4mm, 5.5mm and 8mm variants the female plug supports a SMD resistor that does away with the usual flash that occurs during connection and can harm the surface of both the male and female plugs. The set contains two male, single female and an AFC female connectors together with red and black shrink wrap.

Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark.

Jeti AFC Anti-Spark Connectors

Space

StandBox is a Light Flexible Modular System Used for Building, Maintenance, Transport, and Storage of R/C Model Airplanes.

StandBox




Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here