If you can not see the newsletter click here for HTML

Jeti EX5

Esprit Model
FacebookBlog Esprit ModelYoutubeInstagram
Esprit

Space

Brand New, Elite EX5 Serial Bus Dual Input Servo Channel & Telemetry Expander w/Built-In Temp/G-Force Sensors & Stabilization Finally Arrived, Plug & Play System Only 17g/$125.00!!!

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

The Dual Input Servo Channel Expander EX5 is an intelligent bus manager compatible with several radio control systems. The device converts serial bus signal from up to two receivers to either standard PWM servo outputs, or configurable bus outputs. It offers up to five configurable and high-power servo ports with optional period and fail-safe setting.

The EX5 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver/receivers using just a single cable. In addition, if you are running out of receiver channels simply connect additional SE2/SE4/SE6 to the EX5 serial line/s and freely assign any channels.

The EX5 offers flight stabilization (Optional) using the integrated MEMS gyroscope/accelerometer. Up to three configurable flight modes can be used, each with different stabilization gains and settings. In connection with other devices from our production, such as SE4 or SE6, you can create a complex installation with just a few signal/power cables.

Specifications and Features
- Supported Protocols: Jeti EX, Multiplex M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2
- Small dimensions and high current throughput via the integrated MR30 power connectors.
- Telemetry (RC system dependent): Temperature, Voltage, G-Force (+/-30G), Attitude (Roll/Pitch/Yaw).
- Gyro-stabilized servo outputs, EX Bus, SRXL16ch. or S.Bus.
- Flight stabilization offering 3 configurable flight modes (Manual/Acro/Horizon).
- Automatic detection of serial data/telemetry after startup.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interface.

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Advance Model Installation
Attach the required servos or additional bus devices (SE2/SE4/SE6) to the EX5 (ports 1-5). Connect up to two receivers through their bus outputs. In case of a single receiver, always connect primary RX to the RX1 port of the EX5. Turn on the transmitter and apply the appropriate power source to the EX5. The status LED starts blinking as soon as the EX5 detects signal on the serial line. Please note that both receivers have to use the same data protocol (S.Bus, EX Bus...).

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & StabilizationElite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Flight Stabilization (Up to 16 Channels)
Install the EX5 in parallel to the flight axes, as close to the center of gravity as possible. By default, the axes printed on the device point in the direction of flight: X-Front, Y-Right, Z-Top. In case you need to install the EX5 in a different direction, please keep in mind that the arrows on the device must be parallel to the flight axes. In such case, the resulting orientation of the device must be set in the configuration menu.

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Stabilization Modes and Channel Switch You can use up to three flight stabilization modes operated by a dedicated transmitter channel.
  • Manual - Flight stabilization is disabled and the EX5 just passes channel data from the receiver(s).
  • Acro- Standard flight stabilization with configurable rate/heading gains. You can decide which axes will be controlled by just rate gains (so called Normal or Damping mode) with heading gain disabled. With additional heading gains, the Heading hold function will be active.
  • Horizon- The stabilization function is similar to the Acro mode, additionally the model returns to horizontal position if the Aileron/Elevator sticks are released.
Stabilization Gains The stabilization gains can be set independently for each axis and each flight mode. There are six parameters in total and in the configuration menu you edit the value for the currently active flight mode.

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Space

Introducing, Brand New Addition to the Jeti Family of the Brushless Speed Controllers. Spin Pro 165 Opto ESC, from Well Proven and Time-Tested Manufacturer you Trust (12S/50V, 165A Continues)!!!

Works great on 28-pole 60cc motors
Rob Meinzer (Zionsville, IN)
I've tested with XPWR-60, Hacker Q80-8M and Dualsky GA6000.8 V2 motors. This ESC handles them all well. I'm passing through a little more power (approx 3%) than the Hobbywing Platinum Pro V4 200A ESC that these replaced. Throttle response is crisp and linear with a great 'feel'. I'm currently running the HV165ESC with the Q80-8M in my 95" 3dhs Extra with a 24x10 Mejzlik EL prop (5350 watts) and the GA6000.8 in my 91" Extreme Flight Laser with a 24x12 Xoar PJN (6900 watts).

Jeti Spin Pro
Jeti Spin Pro

Space

Introducing Elite Compact Li-Ion Receiver Battery Packs w/Anti-Vibration Trays & Slim In-Line Configuration, IN STOCK!!!

Elite Compact Receiver 3100mAh 2S 7.2V Li-Ion Battery Pack comes with battery tray holder equipped with anti-vibration isolators and two fully integrated JR/Universal and high power Multiplex connectors.

Elite Compact Receiver 3100mAh 2S 7.2V Li-Ion Battery Pack comes with two receiver leads, first one with JR/Universal and second 16 gauge high power wire with Multiplex Connector.

Elite Rx Battery

Space
Secraft




Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here