Esprit Model
Newsletter: 06/2009  
For comments and suggestions please email us at

Newest On-line Feature, Direct Express Link to Spare Parts.

Beautiful, high gloss, gel-coated Fiberglass spinners in Red, Metallic Silver, White and Black color with lite aluminum backplate back IN STOCK.

BB Fiberglass spinners do not have precut slots for the propeller blades, so you have the option of using 2, 3 and 4 blade props. Just use a dremmel and make your own slots.

Esprit Model now Carries Spare Parts for SAITO engines

JR 12X 2.4GHz Transmitter Only


The L-39 is the most widely-used jet trainer in the world. The V-Pro L-39 Composite offers a high quality composite fuselage, and balsa/ply built up wood wing design. Aerodynamically clean airframe is capable of reaching speeds over 100 mph (165 km/h).

The Mig-15 is often mentioned along with the F-86 Sabre in lists of the best fighter aircraft of the Korean War and in comparison with fighters of other eras.

Sukhoi Su-34 EDF65 (ARF) Trust Vector $300.00 (Coming late July 2009)

This is a BIG all molded foam jet with great detail and great performance. Two 64mm fans with two 3500 Kv Outrunner brushless motors and two 45 Amp brushless speed controllers power the big jet. Take offs from a smooth runway or short grass field are quick and the initial thrust will blast the jet nearly straight up.

Each nozzle is individually controlled and is mixed with both elevator and aileron controls. A 7-channel computer radio (minimum) is a must. We show the step-by-step setup screens of how to program a Spektrum DX-7 with the mixing required. The jet is easy to fly and very solid in the air, however due to the setup, the model is best suited for the experienced to advanced RC pilot.

The Su-34 comes with a set of retractable landing gear with twin wheel trucks for the mains and steerable twin wheel nose gear. Each gear has its own adjustable servo for gear retraction. There are a total of 10 servos pre-installed in the jet: 2-elevator, 2-aileron, 2-vectored thrust, 3-gear retract, 1-steering.


P-47 Thunderbolt GP 60 (ARF)

The P-47 was effective in air combat but proved especially adept at ground attack. With eight .50-caliber machine guns, four per wing. When fully loaded the P-47 could weigh up to eight tons. A modern-day counterpart in that role, the A-10 Thunderbolt II, takes its name from the P-47.

P-51D Mustang 90 (ARF)

The North American Aviation P-51 Mustang was an American long-range single-seat fighter aircraft that entered service with Allied air forces in the middle years of World War II. The P-51 became one of the conflict's most successful and recognizable aircraft.


Introducing the world's first Powered EDF integrated outrunner fan!

The "Storm" series is comprised of new innovative powered EDF fans that are actually dynamically balanced motors and fans in one with special cooling and structural features that are patent pending.

The "Storm 70 Powered EDF Series" can produce up to 4.3 lbs. (1950g) of thrust on 3 to 5 cell Lipos. High temperature neodymium magnets are integrated into the replaceable rotor that can spin over 54,000 rpm.

Other very interesting Hoffman Magnetics product that we also carry

HF EDF60 Mighty Mite Motor
HF EDF70 Beast Motor
HF Micro Mite Motor
HF Mini Mite 3D Motor
HF Sport Rocket Motor
HF Super Sport Motor

Cutting-edge technology describes this new powerful EDF outrunner. It's capable of flying a 36oz. jet with speed and authority. Up to 2 lbs. of thrust.

Raw power is the only way to describe this new EDF 70mm outrunner. Be prepared for new excessive speeds and great performance in your favorite jets. Up to 4 lbs. of thrust on 5s!

This motor is perfect for 4-7oz. 3D park flyers and 6-13oz. sport park flyers. Insane power in a micro outrunner!

This motor is perfect for 6-12oz. 3D park flyers and 10-15oz. sport park flyers. Insane power in a micro outrunner!

This high performance motor is perfect for 9-25oz. sport park flyers, giving a new meaning to "power and performance."

This high performance motor is perfect for 12-22oz. 3D park flyers and 15-28oz. sport park flyers, giving a new meaning to "power and performance."

Hoffman Magnetics products are designed and assembled in Chatsworth, California USA.


Summer is in full swing and Esprit Model has what it takes to keep your heli flying strong. Check out our latest additions:
- GyroBot flybarless system from LF Technik
- Torsion rotor blades and GP exhaust systems from Common Sense RC
- Inertia 860 Gyro from Inertia RC
- EDS 10pcs Heli tool kit w/case from EDS Racing
- 3DX 600 and 700 Flybarless Rotor Heads from 3DX

GyroBot 900 Flybarless Stabilization System

The GyroBot 900 is a very high quality and precise controller and stabilizer for the swashplate and tail rotor of a model helicopter (three axes). It allows you to fly each helicopter with a "Rigid" head version, you no longer need a flybar and a tail gyro (But you can use a Flybar in Beginner- and Beginner Acro Mode).

GyroBot is the only system using three acceleration sensors added to the 3 MEMS gyro sensors of highest quality. So it can recognize much more movements during flight and process them very fast. That means for you: Perfect flight characteristics without adusting very long. The System can be used in the following modes.

Flybarless Rotor Head 3DX FBL700 (12mm)

New from 3DX, this beautiful CNC machined alum rotor head is hand polished and offers unparalleled performance. The perfect choice to convert the Align T-Rex 700 to flybarless operation (12mm Main Shaft). The 3DX 700FBL, when used with a state of the art Flybarless Control System such as the GyroBot 700/900 or Skookum SK-360 provides fantastic control response and stability.

- Fully CNC machined from aircraft grade aluminum
- Hand polished to a brilliant luster
- Integrated swash driver using the original washout links

Torsion Carbon Fiber Main Blades (Petr Novotny)

Torsion blades have been designed and tested by one of the world's best pilot, Petr Novotny.

Suitable for both, beginners and 3D pilots as well, who particularly appreciate firmness and balance in 3D flying. In turns, where bigger pitch angle is necessary, they airfoil and design increases the performance and power. In particular, the most important advantage is an excellent performance in autorotation mode where the required power is easily retained.

Mavrikk SuperGear 30-60 Size

Fully adjustable, plastic upgrade or replacement landing gear for any 30-60 size electric or nitro helicopters. Approximately 165g weight.

Width: 9.5" (240mm)
Length: 12.5" (315mm)
Height: 2.5" (65mm)

NEW RotorTech Carbon Fiber 810mm and 830mm Industrial Helicopter Blades!!!

Align Attack T-Rex 500 Scale Fuselage

Align T-Rex 250 F3C Fuselage

Danny Melnik
Chief Heli Bum


L-39 Albatros EDF70 FF (ARF/RxR)
L-39 Albatros EDF70 FF (ARF/RxR)
Cessna 182 Skylane 120 (ARF)
Cessna 182 Skylane 120 (ARF)
Digital Flybar SK-360 LCD Field Terminal
Digital Flybar SK-360 LCD Field Terminal
DS378MG Thin Wing NEW!!!
DS378MG Thin Wing NEW!!!
GP-Exhaust Tuned Pipe 55 (OS50/YS50/TT50/TT53)
GP-Exhaust Tuned Pipe 55 (OS50/YS50/TT50/TT53)
X-Treme Series Pilot Adolf
X-Treme Series Pilot Adolf
Futaba T10C, Rx R6014FS Air
Futaba T10C, Rx R6014FS Air
Futaba T10C, Rx R6014FS Heli
Futaba T10C, Rx R6014FS Heli
EDF Sapac 70mm Fan
EDF Sapac 70mm Fan
Celectra 4-Port 3.7V Charger
Celectra 4-Port 3.7V Charger
Deans Ultra Serial Connector 2S
Deans Ultra Serial Connector 2S
T-Rex 250 F3C Fuselage (Red)
T-Rex 250 F3C Fuselage (Red)
E-Flite Power 15BL Outrunner Motor
E-Flite Power 15BL Outrunner Motor
G-Force CNC Tuner Arms Kit T-Rex 700N
G-Force CNC Tuner Arms Kit T-Rex 700N
Pushrod Assembly CF 330 x 4mm (4)
Pushrod Assembly CF 330 x 4mm (4)
Thunder Power Rx Battery Pack 5300mAh 7.4V
Thunder Power Rx Battery Pack 5300mAh 7.4V


Hangar 9 Taylorcraft 150

Hangar 9 Saratoga 40

Hangar 9 Toledo Special 40

Reichard Elipsoid Evo 2800mm

Reichard Alsema Sagitta 3m

Reichard Sirius 3m

Hitec Funcopter

Hitec Aurora 9 2.4GHz Radio

Hitec Spectra 2.4GHz Module w/Optima 7 Receiver

If you can not see the newsletter click here for HTML

Esprit Model 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events. Esprit Model 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

To unsubscribe from our database please click here.