Exclusive Discounts and Promotions
Don't be Left Out Follow us Now!
Don't be Left Out Follow us Now!
High Power 5S Upgrade for 70mm EDF models TJ70 Shroud for Neu or E-Flite motors ($150.00)
(Use with Wemotec Mini or Delta-V Rotor)
Our Best ARF Sailplanes!!!!!
Astra Electro (ARF)
Baracuda Sailplane (ARF)
Variant II (ARF)
Sprinter Evo Hotliner (ARF)
Pulsar 2E (ARF)
Pulsar 3.6E (ARF)
 Nike 2 Hotliner (ARF) |
 Dream Electro (ARF) |
 Stinger Pylon Racer (ARF) |
 Servo Arm Full |
 Servo Arm Full/Offset |
 Servo Arm Half V3 |
 Transmitter Stand Full |
 Tx Battery Pack 2300 Universal |
 Rx Battery Pack Flat 1700 |
 Neu 2230G Super HD Series Motors |
 Spektrum AR9200 2.4GHz |
 Bantam BC6DX AC/DC |
 Soldering Torch/Iron |
 Rosin Core Solder |
 Tool Case/Box Stainless Steel |
 Steel Music Wire |
 Brass Metal Strips |
 Brass Square Tubes |
 Siesta Electro 1.86m (ARF) $235.00 |
 Astra Electro 2.5m (ARF) $265.00 |
 Fantasy Sailplane 3.2m (ARF) $465.00 |
 Elixir Sailplane 3.2m (ARF) $465.00 |
 Avia Electro 2.5m (ARF) $295.00 |
 Gracia Electro F5J 3.1m (ARF) $495.00 |
Scorpion 20-50mm Inrunner Brushless Motors
There will be 6 different diameters of motors available, with several lengths in each diameter. Here is a complete listing of all the sizes that Scorpion plans on producing. The first two digits of the part number is the stator diameter and the second two digits are the length of the stator, both in millimeters. The actual length of the motor will be longer than the stator, since there will be end caps and bearings on each end of the stator.
20mm Outside Diameter: IS-1910, IS-1915, IS-1920 and IS-1925
29mm Outside Diameter: IS-2813, IS-2818, IS-2825, IS-2830 and IS-2838
36mm Outside Diameter: IS-3423, IS-3430, IS-3438, IS-3453 and IS-3468
40mm Outside Diameter: IS-3815, IS-3823, IS-3830, IS-3838, IS-3853 and IS-3868
45mm Outside Diameter: IS-4325, IS-4330, IS-4338, IS-4342, IS-4353 and IS-4363
50mm Outside Diameter: IS-4825, IS-4830, IS-4838, IS4842, IS-4851 and IS-4863
All of the 20mm, 29mm, 36mm and 40mm motors will be made in a 12N4P configuration, and all of the 45mm and 50mm motors will be made in a 24N8P configuration.
