New Jeti Spin Pro 80/100/160A SHED ESCs w/5A BEC, In Stock!!!
New Jeti Spin Pro SHED (Slim/Hotliner/Electric Ducted Fan) controllers will give you unprecedented control of the programming for your brushless motors. All includes Switching BEC that allows you to run up to 8 servos. Any SPIN controller can be used either in airplanes, sailplanes, fix pitch or 3D helicopters (constant RPM).
SPIN controllers can be quickly programmed without a computer; the SPIN BOX is all that is needed. SPIN controllers have a Data Logging function that lets you check and fine tune the setup of your airplane or helicopter. Readings for Peak controller temperature, Maximum current, Minimum current, RPM, Motor run time and many other parameters are recorded and can be viewed right on the SPIN BOX after a flight. This allows you to make adjustments immediately and fly again to see the results.
Jeti AFC Anti-Spark Connectors 4, 5.5, and 8mm (75/150/300A)
The Jeti Model AFC connectors eliminate the flashes often witnessed when connecting controllers and battery packs. Available in 4mm and 5.5mm variants the female plug sports a SMD resistor that does away with the usual flashed that occur during connection and that can harm the surface of both the male and female plug. The sets contain two male connectors, a usual female and an AFC female connector together with red and black shrink wrap.
Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark.
|