 |
||||||
  
|
||||||
Hot New Additions!!!              Jeti AFC Anti-Spark Connectors 4, 5.5, 8mm Good up to 300A!!!    Xnova 4020/25/30/35 & Xnova XTS 2618/20 & 3215, 4530/35 Brushless Outrunner Motors     (Full Story) Custom Servo Frames for your Next Project, IN STOCK!!!    We are now offering specially designed servo frames for mounting servos to a hollow molded wing. Finally, a solid installation with the option of easy removal. No more struggle with fast emergency exchange at the flying field. (Full Story) Jeti Dual Redundant Switch DSM 10, IN STOCK!!!  The DSM 10 from Jeti is dual input redundant electronic switch designed to operate with included magnetic key. The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycles, unlike mechanically operated switches. The redundant DSM 10 switch automatically monitors and switches between two power supplies (Rx Batteries) keeping your system operational. (Full Story) |
Our Gift from Your Friends at Esprit Model!!!
|
|
|
The redundant DSM ESC switch automatically monitors and switches between two power supplies (Two Rx Batteries, Rx Battery & ESC or Two ESCs) keeping your system operational.
In a case of using two ESCs the throttle signal from the receiver is supplied to both controllers simultaneously. |
Magnetic Switch DPSI 12V/20A CUBE Fuel Proof & Waterproof
|
The DPSI Cube is a fully waterproof and fuel proof compact and lightweight magnetic switch suitable for 20A continuous current (40A peak). Due to its high current rating, its low weight and its compact dimensions, the DPSI CUBE is suitable for narrow fuselages as well as RC cars or RC boats.
The switch can be turned ON/OFF from the outside of your model using a included magnet. Magnetic field used to turn ON/OFF magnetic switch easily penetrates covering, fiberglass or carbon fiber, so no installation holes are needed. |
Magnetic Switch DPSI 10V/7A Nano
|
The DPSI Nano is super lightweight magnetic switch suitable for 7A continuous current (20A peak). Due to its high current rating, low weight and its compact dimensions, the DPSI Nano is suitable for narrow sailplane fuselages as well as RC cars or RC boats. The faceplate contains an integrated LED to indicate the ON/OFF status of the switch.
Magnetic field used to turn ON/OFF magnetic switch easily penetrates covering, fiberglass or carbon fiber, so no installation holes are needed. |
Emcotec Power Wire Harnesses & Connector Sets
Emcotec DPSI 2018 Power & Signal Distribution System S.Bus with Telemetry, Fully Compatible with Jeti EX Bus, Futaba S.Bus, Graupner HOTT, Spektrum DSMX Protocols!!!
The Emcotec 2018 power distribution system can manage up to four different power servo lines as well as additional 10 standard PWM channel and fully supports Jeti and other telemetry systems. Up to two receivers with serial (UDI, EX Bus, XBus, HoTT, DSMX) output as well as two power batteries can be connected at the same time to the DPSI 2018 unit for complete Power & Signal redundancy.
(Full Story)
Jeti Receiver Li-Ion 2600 - 5800mAh Battery Packs, IN STOCK!!!
Jeti Power Ion RB receiver battery pack comes equipped with built-in over-charging (Voltage higher than 5V/cell), and over-discharging (150A) protection circuits. One of the biggest advantages of the Li-Ion cells is the mechanical resistance due to reinforced metal casing.
Fuel Pump System SE V3 Glow/Gas/Diesel,/Jet, IN STOCK!!!
Emcotec Safety Power Switches SPS 34V & 70V from 60A to 280A
NEW Secraft, Jeti FPV & APV Transmitter Upgrades!!!   
|