If you can not see the newsletter click here for HTML

Our Gift from Your Friends at Esprit Tech!!!
Get 11% OFF In Stock Items!!!*

Coupon Code: DEAL10114OFF
(Expires October 30, 2016 at 24:00 EST US) Good Choice

AXi 3D Extreme Motors with Jeti Integrated Telemetry

* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.

Jeti USA Press Release!!!

Jeti Duplex DS-24 2.4GHz Radio System with Color Display, Dual Haptic Feedback, Voice Commands & Microphone Is Open for Pre-Order!!!

Jeti Duplex DS-24 Standard Titanium $1895.00
Jeti Duplex DS-24 Carbon Titanium $1995.00
Jeti Duplex DS-24 Carbon Painted Black $2095.00
Jeti Duplex DS-24 Carbon Painted Red $2095.00

* Picture shown is for illustration purpose only. Actual product may vary due to future product enhancement.

Brand New Jeti Switching BEC SBEC 30 D EX (2-16S) with Telemetry and Integrated Telemetry Expander ($89.00)!!!

Modelers using different radio systems can also directly benefit from Jeti SBEC 30 D EX using standalone telemetry with a JetiBox Profi and one of the R4US, R5US, R6US, R7-9-11US, R14-18US receivers for current and capacity telemetry data.

Brand new Jeti SBEC 30 D EX (2-16S) switching regulator with telemetry gives you exact data about your servos regarding your on-board radio system current (A) and power (mAh) consumption. The SBEC 30 D EX also can help you indirectly identify possible servo problems (max current increase) and give you the opportunity to resolve any issues before a possible catastrophic failure. Another advantage of having live on-board telemetry is the ability to fine tune the setup of multiple servo surfaces as out of sync servos will fight each other and increase current consumption. The SBEC 30 comes with universal 4-port magnetic switch.
Select output voltage using Transmitter Devices Explorer: 5-8.4V adjustable in 0.1V steps.

For the first time ever, your models receiver system can be turned ON/OFF with a simple flip of the switch, wirelessly from the Jeti DC/DS transmitters. The R3/RSW receiver fully replaces Jeti Magnetic Switch which is widely used with Jeti Voltage Regulators as well as their Electronic Switches. Simply cut or unplug the existing switch (Install a Male JR type connector if needed), and connect your device to the #3 port of the R3/RSW receiver.

Limited Time ONLY, Buy Jeti DS-14 Diablo 2.4GHz Radio System and Receive Free R3 Duplex Receiver!!!

(Expires October 30, 2016 at 24:00 EST US) Good Choice

The new Jeti DS-14 Heli transmitter allows you to create system that only includes what you actually need, but one that also gives you the opportunity for future expansion. For the first time Jeti’s DS-14, State-of-the-art transmitter lets you customize its software and features. Now, you only pay for features that you will actually use. Save up front on a cutting edge radio system, but keep your options open for when your needs change.

DS-14 Carbon Heli Features (Diablo Edition)
- Setup for Helicopters with smooth left throttle stick and momentary button installed at SG position.
- Custom, genuine Carbon Fiber front panel with UV stabilized acrylic clear coating.
- Solid aluminum, CNC frame finished in multi-layer automotive paint and metallic clear coating.
- State-of-the-art, upgradable firmware which gives you full freedom and complete control.
- Installed Firmware Updates: Flight Modes (6 Total), Gyro Settings (3 Total)
- DS-14 Carbon Heli radio system comes with transmitter aluminum case.

New Multimode CNC Gimbals with Vibration (Haptic Feedback) for Jeti DS-24 & DC-24 2.4GHz Radios!!!

Check out the new Multimode CNC gimbals for Jeti DS/DC radios. From now on we can easily setup radios in Mode 1 to 4 or multi-rotor Mode 5 (Both gimbals centered) with simple hex driver.

Note: At this time only new Carbon Jeti USA and DC/DS-24 are equipped with this type of gimbals.

Jeti Transmitter Gimbal Assembly DC Multi-Mode Black w/Vibration