|
|
|
Power and Signal Distribution & Power Redundancy the Jeti Style. All Proven and Time Tested with Live Telemetry & Wireless ON/OFF Switching (DSM10, SBEC 30, Central Box 200)!!!
The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to two batteries and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy.
With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.
|
Fail-Safe Setting
Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal
generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can
also select how the Central Box responds at signal loss for each of the individual outputs.
|
|
Servo Mapping
Servo No. - Assigning outputs of the transmitter to the Central Box outputs.
Group - Assigning specific output to the group of output impulses that will be generated from the receiver
in the same time.
|
|
Duplex Telemetry
Temperature - Temperature of the Central Box
Shorted Outputs No. - Number of Overloaded Outputs
Voltage - Voltage of Individual Outputs of the Central Box
Current - Current Drawn from the Battery
Capacity - Capacity Taken from the Batteries
|
The DSM 10 from Jeti is dual input redundant electronic switch designed to operate with included magnetic key. The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycles, unlike mechanically operated switches. The redundant DSM 10 switch automatically monitors and switches between two power supplies (Rx Batteries) keeping your system operational.
Two Independent Receiver Battery Packs Used for Redundancy
Brand new Jeti SBEC 30 D EX (2-16S) switching regulator with telemetry gives you exact data about your servos regarding your on-board radio system current (A) and power (mAh) consumption. The SBEC 30 D EX also can help you indirectly identify possible servo problems (max current increase) and give you the opportunity to resolve any issues before a possible catastrophic failure. Another advantage of having live on-board telemetry is the ability to fine tune the setup of multiple servo surfaces as out of sync servos will fight each other and increase current consumption. The SBEC 30 comes with universal 4-port magnetic switch.
Select output voltage using Transmitter Devices Explorer: 5-8.4V adjustable in 0.1V steps.
|
|
|
|
|
Introducing Brand New Line of AXi 2830 & 2835 L 1000W, Outrunner Sailplane Brushless Motors with Extended Case, $105.00/$115.00 (In Stock)!!!
|
AXi's new, 38mm motors will outlast the competition while making great power. AXi have added large diameter radial bearing to support the longer rotor and four (4) separate bearing sets along the main shaft for smoother operation. High quality windings and the best quality magnets make for a motor capable up to 1000 Watts.
|
|
|