Esprit Tech 321.729.4287

If you can not see the newsletter click here for HTML

Jeti Transmitter Brackets and Handles for DC & DS Radios

Our Gift from Your Friends at Esprit Tech!!!
Get 11% OFF In Stock Items!!!*

Coupon Code: DEAL1132OFF
(Expires March 29, 2017 at 24:00 EST US) Good Choice

* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.

Receivers Facts: All Transceivers (Send & Receive Data), All Built In Telemetry, All Full Range, All Wirelessly Programmable, All Dual RF Deck, All High Voltage, All Provides Single Line Data Link (UDI, PPM+/-, EX Bus, S.Bus), R7-R18 Provide Satellite Port and ALL IN STOCK!!!

Port Configurations (Rx Firmware 3.20):
Standard: 1-16, 18 Servo, 17 Servo, Satellite In/Out, 18 Satellite In, Ext Telemetry/USB Programming
PPM/Servo: 1-16, 18 Servo, 17 PPM, Ext Telemetry/USB Programming
EX Bus/Servo: 1-16, 18 Servo, 17 Servo, Satellite In/Out, 18 Satellite In, Ext EX Bus/USB Programming
UDI/Servo: 1-16, 18 Servo, 17 UDI, Ext Telemetry/USB Programming

Jeti Telemetry Sensors & ESCs w/Telemetry, Wireless Programming and Integration (50+ and Counting)!!!

Jeti Telemetry Sensor Air Pressure MBar EX & Expander

MBar Transmitter Setting
On the main screen in the general menu you can see all the available options, actual pressure, temperature, and also maximum and minimum values. The minimum and maximum values can be reset manually in the menu or using your transmitter.

Power and Signal Distribution & Power Redundancy the Jeti Style. All Proven and Time Tested with Live Telemetry & Wireless ON/OFF Switching (DSM10, SBEC 30, Central Box 200)!!!

The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to two batteries and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.

	Fail-Safe Setting Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
	Servo Mapping Servo No. - Assigning outputs of the transmitter to the Central Box outputs. Group - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.
	Duplex Telemetry Temperature - Temperature of the Central Box Shorted Outputs No. - Number of Overloaded Outputs Voltage - Voltage of Individual Outputs of the Central Box Current - Current Drawn from the Battery Capacity - Capacity Taken from the Batteries

Jeti Central Box 200 Power Distribution Unit w/Magnetic Switch

The DSM 10 from Jeti is dual input redundant electronic switch designed to operate with included magnetic key. The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycles, unlike mechanically operated switches. The redundant DSM 10 switch automatically monitors and switches between two power supplies (Rx Batteries) keeping your system operational.

Two Independent Receiver Battery Packs Used for Redundancy

Brand new Jeti SBEC 30 D EX (2-16S) switching regulator with telemetry gives you exact data about your servos regarding your on-board radio system current (A) and power (mAh) consumption. The SBEC 30 D EX also can help you indirectly identify possible servo problems (max current increase) and give you the opportunity to resolve any issues before a possible catastrophic failure. Another advantage of having live on-board telemetry is the ability to fine tune the setup of multiple servo surfaces as out of sync servos will fight each other and increase current consumption. The SBEC 30 comes with universal 4-port magnetic switch.

Select output voltage using Transmitter Devices Explorer: 5-8.4V adjustable in 0.1V steps.

Brand New Jeti Studio Program for Visualization and Telemetry Data Analysis & Jeti DS/DC-24 Model Program Emulator (Transmitter PC Programmer)!!!

JETI Studio is a cross-platform program for the visualization and analysis of telemetry data received from sensors. The program is available free of charge as a software support to the Duplex product line.

Graphical visualization of telemetry records produced by the DC/DS (*.log files) and Flight Monitor program (*.jml files)
Direct support for JETIBOX profi - reading log files and real-time telemetry
Real-time telemetry visualization
Device updates - you can easily update your receivers, sensors etc.
EX Bus devices configuration
Integrated DC/DS-24 transmitter emulator