Esprit Tech 321.729.4287

If you can not see the newsletter click here for HTML

Transmitter Brackets & Handles for DC & DS Radios from Jeti USA

Our Gift from Your Friends at Esprit Tech!!!
Get 11% OFF In Stock Items!!!*

Coupon Code: DEAL1152OFF
(Expires May 31, 2017 at 24:00 EST US) Good Choice

* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.

Limited Time ONLY, Buy Jeti DS-14 Diablo, any DS/DC-16 Carbon or DC-24 Radio System and Receive FREE Jeti R7 or REX 7 Duplex Receiver.*

(Expires May 31, 2017 at 24:00 EST US)

*This offer is not retroactive, eligible radios clearly marked (FREE R7 or REX 7 Receiver).

Power and Signal Distribution & Power Redundancy the Jeti Style. All Proven and Time Tested with Live Telemetry & Wireless ON/OFF Switching (DSM10, SBEC 30, Central Box 200)!!!

The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to two batteries and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.

	Fail-Safe Setting Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
	Servo Mapping Servo No. - Assigning outputs of the transmitter to the Central Box outputs. Group - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.
	Duplex Telemetry Temperature - Temperature of the Central Box Shorted Outputs No. - Number of Overloaded Outputs Voltage - Voltage of Individual Outputs of the Central Box Current - Current Drawn from the Battery Capacity - Capacity Taken from the Batteries

Jeti Central Box 200 Power Distribution Unit w/Magnetic Switch

The DSM 10 from Jeti is dual input redundant electronic switch designed to operate with included magnetic key. The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycles, unlike mechanically operated switches. The redundant DSM 10 switch automatically monitors and switches between two power supplies (Rx Batteries) keeping your system operational.

Two Independent Receiver Battery Packs Used for Redundancy

Brand new Jeti SBEC 30 D EX (2-16S) switching regulator with telemetry gives you exact data about your servos regarding your on-board radio system current (A) and power (mAh) consumption. The SBEC 30 D EX also can help you indirectly identify possible servo problems (max current increase) and give you the opportunity to resolve any issues before a possible catastrophic failure. Another advantage of having live on-board telemetry is the ability to fine tune the setup of multiple servo surfaces as out of sync servos will fight each other and increase current consumption. The SBEC 30 comes with universal 4-port magnetic switch.

Select output voltage using Transmitter Devices Explorer: 5-8.4V adjustable in 0.1V steps.

Go over the functions curves menu in the Jeti Transmitter with this great Jeti Short

Introducing Brand New Line of AXi 2830 & 2835 L 1000W, Outrunner Sailplane Brushless Motors with Extended Case, $105.00/$115.00 (In Stock)!!!

AXi 46 2830/10 Outrunner Brushless Motor V2 (Long)

AXi's new, 38mm motors will outlast the competition while making great power. AXi have added large diameter radial bearing to support the longer rotor and four (4) separate bearing sets along the main shaft for smoother operation. High quality windings and the best quality magnets make for a motor capable up to 1000 Watts.

Brand New, Revolutionary 90 5320, 30cc 5325 & 35cc 5330 Size AXi Brushless Motors with Built In Jeti Telemetry Sensors, Hardened Steel Shafts and Integrated Cooling Fans!!!

After many years of research and testing, AXi engineers have developed a brand new line of 3D Extreme brushless motors. These motors incorporate a completely new way of thinking in the world of high performance 3D flying. The hardened steel shafts, built in propeller adapters, integrated cooling fans and preinstalled Jeti telemetry sensors represent the highest level of quality.

AXi 3D Extreme Motors with Jeti Integrated Telemetry