Esprit Tech 321.729.4287

If you can not see the newsletter click here for HTML

https://www.youtube.com/watch?v=8AEJAN9vMFI

Transmitter Brackets & Handles for DC & DS Radios from Jeti USA

Our Gift from Your Friends at Esprit Tech!!!
Get 11% OFF In Stock Items!!!*

Coupon Code: DEAL11112OFF
(Expires November 15, 2017 at 24:00 EST US) Good Choice

* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.

New V1.09 Jeti Central Box 400 Firmware Update for Adding 3rd. 900MHz or 2.4GHz Receiver for Full Dual Band, Triple Redundancy!!!

Version 1.09 for Central Box 400 Power Distribution Unit
This update brings additional option of adding third Jeti Duplex 900MHz or 2.4GHz receiver for triple dual band redundancy. The Central Box 400 supports additional receiver via Ext1 port using EX Bus protocol.

For proper function the transmitter device folder needs to be updated using new configuration file "CBOX400.bin".

Jeti Switching BEC SBEC 30 D EX (2-16S) with Telemetry and Integrated Telemetry Expander ($105.00)!!!

Modelers using different radio systems can also directly benefit from Jeti SBEC 30 D EX using standalone telemetry with a JetiBox Profi and one of the R4US, R5US, R6US, R7-9-11US, R14-18US receivers for current and capacity telemetry data.

Brand new Jeti SBEC 30 D EX (2-16S) switching regulator with telemetry gives you exact data about your servos regarding your on-board radio system current (A) and power (mAh) consumption. The SBEC 30 D EX also can help you indirectly identify possible servo problems (max current increase) and give you the opportunity to resolve any issues before a possible catastrophic failure. Another advantage of having live on-board telemetry is the ability to fine tune the setup of multiple servo surfaces as out of sync servos will fight each other and increase current consumption. The SBEC 30 comes with universal 4-port magnetic switch.
Select output voltage using Transmitter Devices Explorer: 5-8.4V adjustable in 0.1V steps.

For the first time ever, your models receiver system can be turned ON/OFF with a simple flip of the switch, wirelessly from the Jeti DC/DS transmitters. The R3/RSW receiver fully replaces Jeti Magnetic Switch which is widely used with Jeti Voltage Regulators as well as their Electronic Switches. Simply cut or unplug the existing switch (Install a Male JR type connector if needed), and connect your device to the #3 port of the R3/RSW receiver.

Go over the functions curves menu in the Jeti Transmitter with this great Jeti Short

Brand New, Revolutionary 45cc 5345 & 60cc 5360 Size AXi Brushless Motors with Built In Jeti Telemetry Sensors, Hardened Steel Shafts and Integrated Cooling Fans (In Stock)!!!

After many years of research and testing, AXi engineers have developed a brand new line of 3D Extreme motors. These motors incorporate a completely new way of thinking in the world of high performance 3D & Scale flying. The hardened steel shafts, built in propeller adapters, integrated cooling fans and pre-installed Jeti telemetry sensors represent the highest level of quality.

Brand New, Revolutionary, High Torque 36 Pole AXi 8112-215/165 & 8120-190/140 Brushless Motors with Built In Jeti Temperature & RPM Telemetry Sensors, Hardened Steel Shafts (In Stock)!!!

After many years of research and testing, AXi engineers have developed a brand new line of 3D Extreme brushless motors. These motors incorporate a completely new way of thinking in the world of high performance 3D flying. The hardened steel shafts, built in propeller adapters, integrated cooling fans and preinstalled Jeti telemetry sensors represent the highest level of quality.

AXi 3D Extreme Motors with Jeti Integrated Telemetry