If you can not see the newsletter click here for HTML

Jeti Video

Esprit Model
FacebookBlog Esprit ModelYoutube

Transmitter Brackets & Handles for DC & DS Radios from Jeti USA



Our Gift from Your Friends at Esprit Tech!!!
Get 11% OFF In Stock Items!!!*

Coupon Code: DEAL11011OFF
(Expires January 10, 2018 at 24:00 EST US)Good Choice

A Closer Look: Jeti Central Box 100 Mini Redundant System w/Dual Rx, Batteries & Wireless Switch
* We Reserve right to exclude certain Items from this promotion due to Manufacturer/Distributor MAP Policy.


Joe Smith’s Portable Flying Field Charging Station with Jeti Wireless Telemetry (Pocket JetiBox Profi)!!!

Telemetry technology has allowed the Radio Control industry to come a long way, and Jeti’s Telemetry System is no exception! The Jeti Telemetry System of transceivers and sensors allows you to monitor multiple parameters occurring in your aircraft in real-time, but why limit the telemetry to aircraft only?

After switching to the Jeti DS-16 Radio, Joe had become quite familiar with telemetry technology and its uses, which led him to the question “If I could monitor and setup alarms for the temperature, voltage, current, and mAh usage of everything in my airplane while it was in the air, then why couldn’t I do this with a charging case?”

Therefore, if a problem should arise, you will know instantly. The advent of modern telemetry systems have not only given great insights about our aircraft during flight, but have simplified the processes that were once troublesome. With the line of Jeti Products, these systems are easily available, and as we are learning, the possibilities are endless.

Jeti Radios
Jeti Radios Jeti Radios


Power and Signal Distribution & Power Redundancy the Jeti Style. All Proven and Time Tested with Live Telemetry & Wireless ON/OFF Switching (DSM10, SBEC 30, Central Box 200)!!!

The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to two batteries and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.

Jeti Central Box 200 Power Distribution Unit w/Magnetic Switch
Fail-Safe Setting
Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
Jeti Central Box 200 Power Distribution Unit w/Magnetic Switch
Duplex Telemetry
Temperature - Temperature of the Central Box
Shorted Outputs No. - Number of Overloaded Outputs
Voltage - Voltage of Individual Outputs of the Central Box
Current - Current Drawn from the Battery
Capacity - Capacity Taken from the Batteries
Jeti Central Box 200 Power Distribution Unit w/Magnetic Switch

The DSM 10 from Jeti is dual input redundant electronic switch designed to operate with included magnetic key. The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycles, unlike mechanically operated switches. The redundant DSM 10 switch automatically monitors and switches between two power supplies (Rx Batteries) keeping your system operational.

Two Independent Receiver Battery Packs Used for Redundancy (Use with any RC System)

DSM 10

Brand new Jeti SBEC 30 D EX (2-16S) switching regulator with telemetry gives you exact data about your servos regarding your on-board radio system current (A) and power (mAh) consumption. The SBEC 30 D EX also can help you indirectly identify possible servo problems (max current increase) and give you the opportunity to resolve any issues before a possible catastrophic failure. Another advantage of having live on-board telemetry is the ability to fine tune the setup of multiple servo surfaces as out of sync servos will fight each other and increase current consumption. The SBEC 30 comes with universal 4-port magnetic switch.

Select output voltage using Transmitter Devices Explorer: 5-8.4V adjustable in 0.1V steps.

Go over the functions curves menu in the Jeti Transmitter with this great Jeti Short


Graupner Polaron Single and Multi Port AC/DC & DC Chargers with Balancers, Matching Power Supplies and Wireless Module, In Stock!!!

Polaron-Chargers Polaron-Chargers Polaron-Chargers


Brand New, Revolutionary 90 5320, 30cc 5325 & 35cc 5330 Size AXi Brushless Motors with Built In Jeti Telemetry Sensors, Hardened Steel Shafts and Integrated Cooling Fans!!!

After many years of research and testing, AXi engineers have developed a brand new line of 3D Extreme brushless motors. These motors incorporate a completely new way of thinking in the world of high performance 3D flying. The hardened steel shafts, built in propeller adapters, integrated cooling fans and preinstalled Jeti telemetry sensors represent the highest level of quality.

Axi 3D Motors

Universal Motor Mount AXi 28Universal Motor Mount AXi 41AXi Replacement Shaft and Bearing Sets
AXi 3D Extreme Motors with Jeti Integrated Telemetry

Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here