 |
||||||
 |
||||||
 Introducing First Ever, Elite Electronic Receiver Power & Ignition Kill Sliding Touch Switches with Incredible Low Standby Current (0.05mAh)!!! (Yup We Did It Again)!!!  The Elite Sliding Touch Switch is an electronic device that can be used to turn ON and OFF the electronics in your RC model. It can replace any electronic or mechanical switch. Features configurable touch sensitivity, last power-on status is stored in the internal memory, and very low standby current. You do not need any additional tools to power up your model (such as a magnet in the case of a magnetic switch). The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycle, unlike mechanically operated switches. The faceplate contains an integrated LED to indicate the ON/OFF status of the switch. Should any of the devices become disconnected from the switch, the device will stay ON and switch will remember its last state. 
|
||||||
Introducing Intelligently Designed, Super Heavy Duty, Brushless Motor or Gas Engine Standoffs w/Adjustable Trust Angle & Vibration Dampeners!!!
Made by Hacker, our new adjustable standoffs are machined from aluminum and are designed to mount an electric motor or engine into your model. The distance from the cowl to the back of the spinner as well as side and down thrust can be adjusted continuously by turning the thread and cutting off the excess portion of the standoff. The distance from the motor mount to the motor box or firewall can be adjusted between 20mm and 55mm (3/4" and 2 1/8"). Recommended for 2kW to 9.5kW electric motors or 30cc to 180cc engines. Installation holes (ID 5.3mm) are designed for M5, 80mm to 120mm long bolts or M5 threated rods. A washer with a spherical surface is inserted on the spherical face of the spacer bolt. When adjusting side thrust and down thrust, the wedge-shaped openings on the contact surface allow compensation of up to 4 degrees on all sides. 
|
||||||
Introducing Simple Jeti Electronic Dual Input Power Switch V-Cable for 4A/12A Current (Mini Power Redundancy for $15.00)!!!The V-Cable is designed for two independent 5V - 8.4V power inputs and supports up to 4A continuous current or 12A burst current for your connected devices. This unit is most suitable for light weight models, like electric or thermal duration sailplanes, in which you want to run two separate power sources. Please note that V-Cable does not include a regulator, output voltage is equal to the larger of two input voltages.   |
||||||
Transmitter Universal Soft Shell Cases!!!
|
||||||
|
Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events. Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers). UNSUBSCRIBE Newsletter Click here |