If you can not see the newsletter click here for HTML

Jeti Power Distribution
Esprit Model
FacebookBlog Esprit ModelYoutubeInstagram

Jeti Receivers, Central Boxes, Transmitters & Sensors ALL IN STOCK!!!

Jeti Duplex 2.4GHz/900MHz Radio SystemsJeti Duplex 2.4GHz/900MHz Radio SystemsJeti Duplex 2.4GHz/900MHz Radio SystemsJeti Mezon ESCs

Space

Introducing Brand New, Elite SE6 Servo Channel Expander/Serial to PWM, (Only 5g) for Jeti EX, Graupner HoTT & Futaba S.Bus2 Radio Systems!!!

The SE6 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of receiver channels simply connect the SE6 to the receiver serial line and freely assign its own output channels.

Specifications and Features
- Supported Protocols: Jeti EX, Multiplex M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2
- Small dimensions and high current throughput via the integrated MR30 power connector.
- Automatic detection of serial data/telemetry after startup.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interface.

Continues/Peak Current: 15A/60A (2 Seconds)
Operational Current: 15mA
Operational Voltage: 4-14V (Recommended 5-8.4V)
Dimensions: 34mm x 19mm x 8mm
Weight: 5g

Elite SE6 Servo Channel Expander Serial
Elite SE6 Servo Channel Expander Serial

Space

Introducing Intelligently Designed, Super Heavy Duty, Brushless Motor or Gas Engine Standoffs w/Adjustable Thrust Angle & Vibration Dampeners!!!

Motor/Engine Standoffs Super
Made by Hacker, our new adjustable standoffs are machined from aluminum and are designed to mount an electric motor or engine into your model. The distance from the cowl to the back of the spinner as well as side and down thrust can be adjusted continuously by turning the thread and cutting off the excess portion of the standoff. The distance from the motor mount to the motor box or firewall can be adjusted between 20mm and 55mm (3/4" and 2 1/8").

Recommended for 2kW to 9.5kW electric motors or 30cc to 180cc engines. Installation holes (ID 5.3mm) are designed for M5, 80mm to 120mm long bolts or M5 threated rods.

A washer with a spherical surface is inserted on the spherical face of the spacer bolt. When adjusting side thrust and down thrust, the wedge-shaped openings on the contact surface allow compensation of up to 4 degrees on all sides.

Motor/Engine Standoffs Super

Space

Introducing Full Range of Secraft Titanium, Lightweight Tailwheel Assembly Kits for 30% to 40% Size Aerobatic Airplanes!!

Tailwheel Assembly Titanium SecraftTailwheel Assembly Titanium Secraft


Space

Check Out Our Version of Timeless Bird of Time Sailplane!!! Introducing TopModel Albatros Classic Sport 3E Sport Electric Sailplane Went Out of The Door!!!

Albatros Classic Sport 3E
Albatros Classic Sport 3E




Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here