Esprit Tech 321.729.4287

If you can not see the newsletter click here for HTML

Multifunction Chargers, Servo Testers/Drivers, Data/Power Analyzers!!!

Introducing Brand New, 18 Channel Jeti Central Box 310 & 320 Power/Signal Distribution Systems with Built In Voltage Regulator w/Tx Adjustable Output (5V-8.4V) and Integrated Telemetry Expander.

The Jeti Central Box 320 is fully programmable switchboard with two (2) independent, stabilized power inputs with single voltage regulator (20A Continues/80A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Jeti Central Box 320 has a unique design that provides overload protection for up to 10 Standard (up to 415 oz/in, 30 kg/cm) and 8 Ultra Torque (up to 830 oz/in, 60 kg/cm) servos. The Jeti Central Box 320 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three (3) receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power & RF Signal Redundancy. In addition the Jeti Central Box 320 has up to four (4) independent E1/E4 telemetry inputs. The onboard BEC allows the output voltage for the servo to be adjusted from 5V to 8.4V in 0.1V steps using Jeti Transmitter Device Explorer interface.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo & EX Telemetry, Fail-Safe Setting or Function Assignment.

Introducing First Ever True Electronic Dual Power Redundant Switch for ESC w/BEC & Backup Battery w/Charging Capabilities and Telemetry Data Stream Elite Voltario T60 30A/12V!!!

The Voltario T60 is a high performance digital dual redundant battery switch with advanced telemetry features and touch switch functionality. It combines a backup battery charging circuit and telemetry with Touch w/LED (Included), optional Sliding, Wireless (R3/RSW) or mechanical switch functionality in a single device.

The T60 is ideal for mid-size models where high-voltage servos are used without voltage stabilization. It provides telemetry and monitors Voltage/V, Capacity/mAh, and Current/A for ESC/BEC & Backup Battery.

Specifications and Features

Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
Touch switch function (Included), Optional Mechanical, Sliding or Wireless (R3/RSW).
Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott telemetry support.
Optional charging of the secondary/backup battery with capacity protection limits.
Remembers the last operating state if the battery is accidentally disconnected.

ESC/Battery Combination: Set the Voltage threshold value below the voltage of the battery eliminator circuit (BEC). In this case, the BEC output will be used exclusively while the secondary input (B2) will act just as a backup battery. Please note that both the ESC BEC and the backup battery must handle the full load of the attached servos.

Backup Battery Charging:The Voltario T60 contains a simple battery charging circuit designed for 2S Li-xx without balancing. The charging may be optionally enabled to keep the backup battery (B2) always ready without the need to remove it from the model (however, we recommend to charge the battery with a balancer at least once in a month). Several safety conditions are used during the charging (See .pdf manual for details).

Elite Electronic Dual Power Redundant Switch

Product Testing: Elite T60 Power Redundant Switch w/Backup Battery Charging & Telemetry

Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here