If you can not see the newsletter click here for HTML

Elite Falcon ESC

Esprit Model
FacebookBlog Esprit ModelYoutubeInstagram
Esprit


Space

Brand New, Elite EX5 Serial Bus Dual Input Servo Channel & Telemetry Expander w/Built-In Temp/G-Force Sensors & Stabilization Finally Arrived, Plug & Play System Only 17g/$125.00!!!

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

The Dual Input Servo Channel Expander EX5 is an intelligent bus manager compatible with several radio control systems. The device converts serial bus signal from up to two receivers to either standard PWM servo outputs, or configurable bus outputs. It offers up to five configurable and high-power servo ports with optional period and fail-safe setting.

The EX5 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver/receivers using just a single cable. In addition, if you are running out of receiver channels simply connect additional SE2/SE4/SE6 to the EX5 serial line/s and freely assign any channels.

The EX5 offers flight stabilization (Optional) using the integrated MEMS gyroscope/accelerometer. Up to three configurable flight modes can be used, each with different stabilization gains and settings. In connection with other devices from our production, such as SE4 or SE6, you can create a complex installation with just a few signal/power cables.

Specifications and Features
- Supported Protocols: Jeti EX, Multiplex M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2
- Small dimensions and high current throughput via the integrated MR30 power connectors.
- Telemetry (RC system dependent): Temperature, Voltage, G-Force (+/-30G), Attitude (Roll/Pitch/Yaw).
- Gyro-stabilized servo outputs, EX Bus, SRXL16ch. or S.Bus.
- Flight stabilization offering 3 configurable flight modes (Manual/Acro/Horizon).
- Automatic detection of serial data/telemetry after startup.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interface.

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Advance Model Installation
Attach the required servos or additional bus devices (SE2/SE4/SE6) to the EX5 (ports 1-5). Connect up to two receivers through their bus outputs. In case of a single receiver, always connect primary RX to the RX1 port of the EX5. Turn on the transmitter and apply the appropriate power source to the EX5. The status LED starts blinking as soon as the EX5 detects signal on the serial line. Please note that both receivers have to use the same data protocol (S.Bus, EX Bus...).

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Elite EX5 Serial Bus Dual Input Servo Channel Expander w/G-Force, Temperature Sensors & Stabilization

Space

The Brand New Line of Elite Falcon ESCs Target Professionals and Pilots Looking for Uncompromising Precision and Quality. The Elite Falcon ESCs Combine New Revolutionary Design, System Upgradability, Almost Unlimited Flexibility with State of the Art Telemetry Capabilities!!!

Jeti Falcon ESCJeti Falcon ESC
Jeti Falcon ESC
The Falcon product line represents advanced speed controllers for exclusive use in airplanes, drones, sailplanes or any kind of radio control application. With integrated telemetry and various possibilities of optional user configuration, the controllers offer high efficiency, low weight and precise motor control. The telemetry system in the Elite Falcon ESC lets you monitor in real time the Amperage (Amp), Voltage (V), and Capacity (mAh) consumed from the battery, ESC even calculates Power (W) output of the system. You can also measure the ESC Temperature and add external Motor Temperature and Propeller Positioning sensors. We have created a more robust hardware platform including increased cooling capability, smaller overall packaging, and selectable sensitivity to allow you to use any brushless motor that you choose. No matter which size you choose, the Elite Falcon series brushless speed controllers are right for your next project.

The USB programmability allows you to update the ESC to the latest firmware right from home using Jeti or Elite USB Adapter and your PC with MAV Manager. Fine tuning of your power system has never been easier.

Specifications and Features
- Supported Protocols: Jeti EX, Multiplex M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2
- Over and under-voltage protection, overtemperature protection, motor-stall protection
- Real-time telemetry data stream and min/max value data logging
- Configurable current limiter, safety shutdown when the throttle impulse is lost
- Configurable acceleration, timing, electromagnetic brake, prop positioning
- Firmware updates via USB interface

Jeti Falcon ESC

Space

Introducing Elite Compact Li-Ion Receiver Battery Packs w/Anti-Vibration Trays & Slim In-Line Configuration, IN STOCK!!!

Elite Compact Receiver 3100mAh 2S 7.2V Li-Ion Battery Pack comes with battery tray holder equipped with anti-vibration isolators and two fully integrated JR/Universal and high power Multiplex connectors.

Elite Compact Receiver 3100mAh 2S 7.2V Li-Ion Battery Pack comes with two receiver leads, first one with JR/Universal and second 16 gauge high power wire with Multiplex Connector.

Elite Rx Battery

Space

StandBox is a Light Flexible Modular System Used for Building, Maintenance, Transport, and Storage of R/C Model Airplanes.

StandBox




Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here