If you can not see the newsletter click here for HTML

Gernot Bruckmann
Esprit Model
 FacebookBlog Esprit ModelYoutubeInstagram

Our Bronco OV-10 is Alive & Well, Introducing Our Newest Addition to Our Fleet, Full of Jeti & Elite Equipment!!!

Esprit Brushless MotorsEsprit Elite Brushless ESCsJeti Duplex Radio SystemsJeti Power Distribution Systems
Space

The Era Has Ended, 10% OFF All Remaining Jeti DC-24 2.4GHz/900MHz Radio Systems, Take Advantage of Discounted Prices. All New, Fully Covered by Manufacturer Warranty (Only 3 Radios Left)!!!

Jeti DC-24Jeti DC-24
Jeti DC-24
Space

Introducing First Ever, True Electronic Dual Power/ Dual BEC Input Switch for ESCs w/BEC or ESC & Backup Battery w/Charging Capabilities, Telemetry and Data Telemetry Expander Capabilities Elite T70 30A/12V!!!

T70
T70
The T70 is a high performance digital dual redundant battery switch with advanced telemetry features and touch switch functionality. It combines a backup battery charging circuit and telemetry with Touch w/LED (Included), optional Sliding, Wireless (R3/RSW) or mechanical switch functionality in a single device.

The T70 is ideal for mid-size models where high-voltage servos are used without voltage stabilization. It provides telemetry and monitors Voltage/V, Capacity/mAh, and Current/A (Dual Rx Batteries, or BEC w/Backup Battery) of both power inputs.

Specifications and Features
  • Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
  • Touch switch function (Included), Optional Mechanical, Sliding or Wireless (R3/RSW).
  • Jeti Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott, PowerBox telemetry support.
  • Optional charging of the secondary/backup battery with capacity protection limits.
  • Remembers the last operating state if the battery is accidentally disconnected.
  • Two telemetry expansion ports that allow connecting additional Duplex EX/EX Bus sensors.
ESC/Battery Combination: Set the Voltage threshold value below the voltage of the battery eliminator circuit (BEC). In this case, the BEC output will be used exclusively while the secondary input (B2) will act just as a backup battery. Please note that both the ESC BEC and the backup battery must handle the full load of the attached servos.

Equal Dual Battery Discharging: Set the Voltage threshold value above the maximum battery voltage. Both batteries will be discharged equally keeping equal voltage. The batteries have to be of the same chemistry, number of cells and similar capacity.

Backup Battery Charging: The T70 contains a simple battery charging circuit designed for 2S Li-xx without balancing. The charging may be optionally enabled to keep the backup battery (B2) always ready without the need to remove it from the model (however, we recommend to charge the battery with a balancer at least once in a month). Several safety conditions are used during the charging (See .pdf manual for details).

T70
Product Testing: Elite T60 Power Redundant Switch w/Backup Battery Charging & Telemetry
Space
>BB Fiberglass Spinners
Space

Secraft Parts and Hardware is Rolling In, Web Pages Updated Daily!!!

Secraft
SecraftSecraft
Secraft
SecraftSecraft
Space

Summer Cleaning: Store Demo Super Sport 2.35E & Albatros Classic Sport 3E Electric Sailplanes RTF/Ready to Fly w/Tons of Finished Details & Jeti Equipment!!!

Store Demo Super Sport 2.35S/E Electric Sailplane (Receiver and Battery Ready)
Store Demo Albatros Classic Sport 3S/E Electric Sailplane w/Extras (Receiver and Battery Ready)


Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here