If you can not see the newsletter click here for HTML

Introducing Elite T75 20/40A Dual Power Redundant Electronic Switch w/Telemetry, Battery or ESC/BEC Power Input Capable!!!

Esprit Tech Press Release: New T75 In Production!!!

Introducing Brand New, Heavy Duty Version of Our Well Known T70 Electronic Dual Power Redundant Switch. The T75 Dual Switch (20A/40A) Features New Input Battery/ESC Power Management, Built-In Telemetry Expander, Telemetry Data Stream for Jeti/Futaba/Graupner/PowerBox RC Systems, Pre-Installed XT60 Power Connectors and Heavy-Duty Aluminum Case!!! (In Stock & Shipping $145.00)

The T75 is a high performance digital dual redundant battery switch with advanced telemetry features and touch switch functionality. It combines a backup battery charging circuit and telemetry with Touch w/LED (Included), optional Sliding, Wireless (R3/RSW) or mechanical switch functionality in a single device.

The T75 is ideal for mid/large-size models where high-voltage servos are used without voltage stabilization. It provides telemetry and monitors Voltage/V, Capacity/mAh, and Current/A for Dual Rx Battery inputs.

Specifications and Features

Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
Touch switch function (Included), Optional Mechanical, Sliding or Wireless (R3/RSW).
Jeti Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott, PowerBox telemetry support.
Optional charging of the secondary/backup battery with capacity protection limits.
Remembers the last operating state if the battery is accidentally disconnected.

Equal Dual Battery Discharging: Set the Voltage threshold value above the maximum battery voltage. Both batteries will be discharged equally keeping equal voltage. The batteries have to be of the same chemistry, number of cells and similar capacity.

Backup Battery Charging: The Voltario T60 contains a simple battery charging circuit designed for 2S Li-xx without balancing. The charging may be optionally enabled to keep the backup battery (B2) always ready without the need to remove it from the model (however, we recommend to charge the battery with a balancer at least once in a month). Several safety conditions are used during the charging (See .pdf manual for details).

Introducing Intelligently Designed, Super Heavy Duty, Brushless Motor or Gas Engine Standoffs w/Adjustable Trust Angle & Vibration Dampeners!!!

Made by Hacker, our new adjustable standoffs are machined from aluminum and are designed to mount an electric motor or engine into your model. The distance from the cowl to the back of the spinner as well as side and down thrust can be adjusted continuously by turning the thread and cutting off the excess portion of the standoff. The distance from the motor mount to the motor box or firewall can be adjusted between 20mm and 55mm (3/4" and 2 1/8").

Recommended for 2kW to 9.5kW electric motors or 30cc to 180cc engines. Installation holes (ID 5.3mm) are designed for M5, 80mm to 120mm long bolts or M5 threated rods.

A washer with a spherical surface is inserted on the spherical face of the spacer bolt. When adjusting side thrust and down thrust, the wedge-shaped openings on the contact surface allow compensation of up to 4 degrees on all sides.

Stop Killing Your Model, Eliminate Connector Harming Flash!!!

The Jeti Model AFC connectors eliminate the flashes often witnessed when connecting controllers (ESCs) and battery packs. Available in 4mm, 5.5mm and 8mm variants the female plug supports a SMD resistor that does away with the usual flash that occurs during connection and can harm the surface of both the male and female plugs. The set contains two male, single female and an AFC female connectors together with red and black shrink wrap.

Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark.

Shop Cleaning: Last One Left, Scale ME-110 Bf G2 Extremely Light, Painted & Hollow Molded in Desert Scheme Made By Savex CZ, In Stock and Ready to Ship (40% OFF)!!!

Esprit Tech 1.321.428.3066 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 1.321.428.3066 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here