|
|
|

Brand New Secraft Electric Fuel Pump SE Gen 2 w/Built In Impeller and Integrated Fuel Filter for Gas, Diesel, Jet or Nitro (In Stock & Shipping)
Fuel Pump features brand new full metal body with built in impeller design, integrated fuel filter and attachment for the battery pack. The pumps are ergonomically designed to be easy to secure to Jerry Can fuel container while fueling.
Do NOT Dry-Run the SE Gen 2 pump. Dry running inflicts severe mechanical damage on pump components, accelerating wear on critical parts and impeller.
Use with synthetic and mineral oils, nitro, gasoline and diesel fuel or kerosene. Pump works with 1/8" (3.2mm) Large Fuel Tubing.
|
|
|
|
|

18 Channel Jeti Central Box 310 & 320 Power/Signal Distribution Systems with Built In Voltage Regulator w/Tx Adjustable Output (5V-8.4V) and Integrated Telemetry Expander.
The Jeti Central Box 320 is fully programmable switchboard with two (2) independent, stabilized power inputs with single voltage regulator (20A Continues/80A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Jeti Central Box 320 has a unique design that provides overload protection for up to 10 Standard (up to 415 oz/in, 30 kg/cm) and 8 Ultra Torque (up to 830 oz/in, 60 kg/cm) servos. The Jeti Central Box 320 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three (3) receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power & RF Signal Redundancy. In addition the Jeti Central Box 320 has up to four (4) independent E1/E4 telemetry inputs. The onboard BEC allows the output voltage for the servo to be adjusted from 5V to 8.4V in 0.1V steps using Jeti Transmitter Device Explorer interface.
With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo & EX Telemetry, Fail-Safe Setting or Function Assignment.

|
|