If you can not see the newsletter click here for HTML

Secraft

Esprit Model
FacebookBlog Esprit ModelYoutubeInstagram

Jeti DS-12 Open for Test Drive, Fly & Play for FREE for 2 WEEKS!!!

DS-12

Space
DS-12

Space

Jeti Telemetry Hall Effect Magnetic On/Off Position Sensor!!!

Jeti Telemetry Sensor Hall Effect Magnetic ON/OFF Position

Our new Magnetic ON/OFF Position Sensor will allow you to trigger events based on the True/False signal sent to your Jeti receiver. This is especially important in applications like gear doors, Up and Go systems for sailplanes, and scale features like opening canopies or gear doors. You will install the magnet on the moving side of your opening and the sensor on the fixed side; allowing you to know when it is closed or open. This signal can then be used in logical switching to prevent accidents from occurring. Imagine a safety lockout that prevents your gear from raising/lowering unless the doors are opened first.

Multiple Position Sensors can be linked in a serial configuration and sent to a single input to signal a True/False condition for a set of doors. A True signal is only achieved when all of the sensors are in agreement.

Jeti Telemetry Sensor Hall Effect Magnetic ON/OFF Position

Space

Secraft Accessories, Upgrades and Parts, This is How We Do It!!!

Secraft
Secraft

Space

Introducing Esprit Elite ESCs with Data Logging & Telemetry, In Stock!!!

Elite controllers can be quickly programmed without a computer; the JetiBox is all that is needed. Speed controllers have a Data Logging function that lets you check and fine tune the setup of your airplane or helicopter. Readings for Peak controller temperature, Maximum current, Minimum current, RPM, Motor run time and many other parameters are recorded and can be viewed right on the JetiBox after a flight. This allows you to make adjustments immediately and fly again to see the results.

Rob's M Testimonial: Esprit Elite 165HV ESC - Success with the XPWR 60!
I installed and programmed the ESC yesterday and snuck out for two flights in a 15mph crosswind. Unfortunately with the crosswind, I was out by myself so no video yet. I'm happy to say the ESC and motor played will together and the acceleration and 'feel' was fantastic. I put the plane in every orientation possible to try and induce a commutation error but the ESC pushed through every maneuver with zero hesitation. My first take on the settings worked great: high filtration, 25 degrees timing, 8khz sampling, 0.6sec acceleration).

This ESC also appears to be pushing through a little more power to the motor than the Hobbywing ESC that it replaced. Vertical acceleration was outstanding. On a fresh set of packs, I pulled 6,779 watts / 145.7 amps / 44.86v min. Xoar PJN 24x12.

Esprit Elite 55SB 8S w/BEC
Esprit Elite 80SB 8S w/BEC
Esprit Elite 100SB 8S w/BEC
Esprit Elite 95HV 12S
Esprit Elite 125HV 12S
Esprit Elite 165HV 12S
$95.00
$109.00
$125.00
$195.00
$225.00
$265.00

Jeti Elite ESCsJeti Elite ESCsJeti Elite ESCsJeti Elite ESCs
Jeti Elite ESCs

Space

Stop Killing Your Model, Eliminate Connector Harming Flash!!!

The Jeti Model AFC connectors eliminate the flashes often witnessed when connecting controllers (ESCs) and battery packs. Available in 4mm, 5.5mm and 8mm variants the female plug supports a SMD resistor that does away with the usual flash that occurs during connection and can harm the surface of both the male and female plugs. The set contains two male, single female and an AFC female connectors together with red and black shrink wrap.

Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark.

Jeti AFC Anti-Spark Connectors




Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here