If you can not see the newsletter click here for HTML

Esprit Tech
Esprit Model
 FacebookBlog Esprit ModelYoutubeInstagram

Jeti Receivers, Central Boxes, Transmitters & Sensors ALL IN STOCK!!!

Jeti Duplex 2.4GHz/900MHz Radio SystemsJeti Serial BusJeti Serial BusEsprit Elite Brushless ESCs
Space

Introducing First Ever, True Electronic Dual Power/ Dual BEC Input Switch for ESCs w/BEC or ESC & Backup Battery w/Charging Capabilities, Telemetry and Data Telemetry Expander Capabilities Elite T70 30A/12V!!!

T70
T70
The T70 is a high performance digital dual redundant battery switch with advanced telemetry features and touch switch functionality. It combines a backup battery charging circuit and telemetry with Touch w/LED (Included), optional Sliding, Wireless (R3/RSW) or mechanical switch functionality in a single device.

The T70 is ideal for mid-size models where high-voltage servos are used without voltage stabilization. It provides telemetry and monitors Voltage/V, Capacity/mAh, and Current/A (Dual Rx Batteries, or BEC w/Backup Battery) of both power inputs.

Specifications and Features
  • Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
  • Touch switch function (Included), Optional Mechanical, Sliding or Wireless (R3/RSW).
  • Jeti Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott, PowerBox telemetry support.
  • Optional charging of the secondary/backup battery with capacity protection limits.
  • Remembers the last operating state if the battery is accidentally disconnected.
  • Two telemetry expansion ports that allow connecting additional Duplex EX/EX Bus sensors.
ESC/Battery Combination: Set the Voltage threshold value below the voltage of the battery eliminator circuit (BEC). In this case, the BEC output will be used exclusively while the secondary input (B2) will act just as a backup battery. Please note that both the ESC BEC and the backup battery must handle the full load of the attached servos.

Equal Dual Battery Discharging: Set the Voltage threshold value above the maximum battery voltage. Both batteries will be discharged equally keeping equal voltage. The batteries have to be of the same chemistry, number of cells and similar capacity.

Backup Battery Charging: The T70 contains a simple battery charging circuit designed for 2S Li-xx without balancing. The charging may be optionally enabled to keep the backup battery (B2) always ready without the need to remove it from the model (however, we recommend to charge the battery with a balancer at least once in a month). Several safety conditions are used during the charging (See .pdf manual for details).

T70
T70
T70
Space

Esprit Tech Press Release T75/2023!!!

Introducing Brand New, Heavy Duty Version of Our Well Known T70 Electronic Dual Power Redundant Switch. The T75 Terminator Dual Switch (20A/40A) Features New Input Battery Management, Built-In Telemetry Expander, Telemetry Data Stream for Jeti/Futaba/Graupner/PowerBox RC Systems and Pre-Installed XT60 Heavy-Duty Connectors & Installation Tray!!! (In Production, Due April 2023/$125.00)

Elite Electronic Dual Power Redundant Switch

The T75 Terminator is a high performance digital dual redundant battery switch with advanced telemetry features and touch switch functionality. It combines a backup battery charging circuit and telemetry with Touch w/LED (Included), optional Sliding, Wireless (R3/RSW) or mechanical switch functionality in a single device.

The T75 is ideal for mid/large-size models where high-voltage servos are used without voltage stabilization. It provides telemetry and monitors Voltage/V, Capacity/mAh, and Current/A for Dual Rx Battery inputs.

Specifications and Features
  1. Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
  2. Touch switch function (Included), Optional Mechanical, Sliding or Wireless (R3/RSW).
  3. Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott, PowerBox telemetry support.
  4. Optional charging of the secondary/backup battery with capacity protection limits.
  5. Remembers the last operating state if the battery is accidentally disconnected.

Equal Dual Battery Discharging: Set the Voltage threshold value above the maximum battery voltage. Both batteries will be discharged equally keeping equal voltage. The batteries have to be of the same chemistry, number of cells and similar capacity.

Backup Battery Charging: The Voltario T60 contains a simple battery charging circuit designed for 2S Li-xx without balancing. The charging may be optionally enabled to keep the backup battery (B2) always ready without the need to remove it from the model (however, we recommend to charge the battery with a balancer at least once in a month). Several safety conditions are used during the charging (See .pdf manual for details).

Elite Electronic Dual Power Redundant Switch
Elite Electronic Dual Power Redundant Switch

Space

Introducing Another Intelligent Design from Your Favorite Hobby Store!!!

Multiplex MPX ConnectorMultiplex MPX Connector
Multiplex MPX Connector

Space

Build Something, We Just Did!!! Another Beauty TopModel Marabu 2.75E Electric Sailplane Went Out of The Door!!!

Marabu 2.75E
Marabu 2.75E


Esprit Tech 321.729.4287 has sent this email to you because your account preferences indicate that you want to receive Information about Special Promotions, Offers and Events.
Esprit Tech 321.729.4287 will NEVER request personal information in any email. (Passwords, Credit Card/Bank Numbers).

UNSUBSCRIBE Newsletter Click here