|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monday-Thursday 9AM-3PM, Live Phone Support w/People Who Actually Have Fun, Fly & Build RC Models and Use Jeti RC Systems
(1.321.428.3066)!!!
|
|
|
|
|
|
|
|
|
|
Elite Electronic Receiver Power & Ignition Kill Sliding Touch Switches with Incredible Low Standby Current (0.05mAh)!!! (Yup We Did It Again)!!!
The Elite Sliding Touch Switch is an electronic device that can be used to turn ON and OFF the electronics in your RC model. It can replace any electronic or mechanical switch. Features configurable touch sensitivity, last power-on status is stored in the internal memory, and very low standby current.
You do not need any additional tools to power up your model (such as a magnet in the case of a magnetic switch). The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycle, unlike mechanically operated switches.
The faceplate contains an integrated LED to indicate the ON/OFF status of the switch. Should any of the devices become disconnected from the switch, the device will stay ON and switch will remember its last state.
|
|
|
|
|
|
|
|
|
|
Introducing Another Intelligent Design from Your Favorite Hobby Store!!!
|
|
|
|
|
|
|
|
|
|
Stop Killing Your Model, Eliminate Connector Harming Flash!!!
The Jeti Model AFC connectors eliminate the flashes often witnessed when connecting controllers (ESCs) and battery packs. Available in 4mm, 5.5mm and 8mm variants the female plug supports a SMD resistor that does away with the usual flash that occurs during connection and can harm the surface of both the male and female plugs. The set contains two male, single female and an AFC female connectors together with red and black shrink wrap.
Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark.
|
|
|
|
|
|
|
|
|
|
StandBox is a Light Flexible Modular System Used for Building, Maintenance, Transport, and Storage of R/C Model Airplanes.
|
|
|
|
|
|
|
|
|
|
|
|
|